Proposal for Joint Venture Partnership / Funding – Gold Mining and Custom Milling Project in Zimbabwe
I am pleased to present this proposal for a potential joint venture partnership or funding support in a promising risk-free gold mining and custom milling project located in Silobela, Zimbabwe.
Our company, our mines (ATM NTOBE D) Dambridge Block 1 & (ATM NTOBE B) Dambridge Block 2 is a duly registered entity under the laws of Zimbabwe and holds a mining license and customer milling letter of approval from the ministry of mines for gold mining operations.
We have identified a viable gold resource and seek to expand our operations through the establishment of a custom milling plant that will not only process our ore but also provide toll milling services to local small-scale miners in the region.
In addition, there is an opportunity of mining the block that was conducted grassroots exploration of desk studies, area selection, land acquisition, regional studies (geology, survey, geo magnetic geophysics), preliminary community engagement.
The survey was conducted tracing the belt of an adjacent mine, Dani Son Mine ”KoMbokola” that is currently doing very well producing high gold volumes for a period of 10+ years.
Project Components
| Component | Description |
|---|---|
| Mining Operations | Open-pit / shallow underground mining using conventional small-scale methods (jackhammers, compressors, etc.). |
| Ore Processing | Crushing → Milling → Gravity concentration → Vat leaching / Cyanidation for gold recovery. |
| Custom Milling Service | Processing of third-party ores on a fee basis to ensure steady cash flow. |
1. Project Overview
Invest $913,950 (R15 857 032), USD / ZAR rate – 17.35 currently in October 2025 that you will recover in 8 months guaranteed in a risk free customer milling, vat leaching, ball mill + CIL & gold buying project at Dambridge area, Silobela, Zimbabwe and also get a chance to get 60% shares as an investor to earn $133 920+ (R2 323 512 +) profit per month for a duration period of 100 years joint venture partnership.
Total – Vat Leaching (8g/t) & Ball Mill + CIL Combined (5g/t) on fine gold (20t) cost per gram – $124 (R2 151.40) ZAR17.35 Rate / USD – Actual Results for 6 months
Vat Leaching – $19 840 x 182 days = $3 610 880 (R62 648 768)
Ball Mill + CIL – $12 400 x 182 days = $2 256 800 (R39 155 480)
Total = $5 867 680 (R101 804 248).
The project aims to:
- Develop and operate a small- to medium-scale gold mine with an average ore grade of approximately 1–5 g/t lowest.
- Establish a custom milling facility (capacity: [e.g., 20–30 tonnes per day]) to process both our ore and third-party ores.
- Implement vat leaching / CIP / gravity concentration methods to ensure efficient gold recovery.
- Create employment and contribute to local economic development in line with Zimbabwe’s Vision 2030 and empowerment initiatives.
Please note that the gold mining & custom milling project is divided into four benefits of income revenue that are risk-free, which is like free money when set right.
(i) Customer milling – Artisan miners use their own resources to extract gold ore that they will bring to a plant for milling. The least grade they bring is more than 1g/t. The sands left during processing are ours for free, whereby you will recover 8g/t – 10g/t on vat leaching & another 5g/t on ball mill + CIL processing.
(ii) Vat leaching – It’s tanks that are cheap to construct using bricks, artisan miners that have small hummer mills offering milling services, and heap sands for leaching. They hire those tanks paying $40/day on each & normally take one week. After vat leaching, those sands are left for free. You can continue with the process on ball mill & CIL processing to recover more gold of about 3g/ – 5g/t
(iii) Ball mill + CIL processing – You can process sands obtained from vat leaching & milling that you got for free from artisan miners to recover more gold. Some milling plants have sands piled up for years after vat leaching without anything plans to do with them since they don’t have ball mill + CIL. Hence, we can collect those sands for free or buy at a small fee for ball + CIL processing to recover more gold.
(iv) Gold buying – All artisan miners that process ore or sands at our plant or outside can sell gold to us. Our mining license permits us to do so. Thus, more income revenue like free money.
(v) Mining – There are two blocks that we can operate on mining to extract more ore to increase productivity for more revenue. Mining is the main agenda, which is like a bonus after applying the first risk-free activities with massive ROI.
CONCLUSION:
Artisan miners throw away gold ore containing less than 1g/t, calling it low grade to extract free gold, but it’s more money when leaching is conducted. We can get ore for free or pay a small fee, same applies to vat leached sands.
The ROI is massive, whereby the investor recovers capital in 8 months when production begins.
Check if artisan miners get the lowest ever, 0.5g/t on free gold. We recover about 2g/t on leaching sands.
Which is 2g x $124/g = $248 x 20t / day = $4960 (R85 056) / day x 182 days (6 months) Total is ($902 720) R15 662 192.
2. Investment Opportunity
We are seeking a partner to provide capital investment or technical and operational support for:
- Plant construction and equipment acquisition (crushers, ball mills, concentrators, and cyanidation system).
- Working capital for operational expenses, chemicals, and logistics.
- Expansion of exploration activities to increase proven reserves.
In return, we offer:
- Equity participation or profit-sharing arrangement, negotiable to ensure mutual benefit.
- Transparent operational and financial reporting.
- Strong local partnerships and compliance with all legal and environmental requirements.
3. Financial Summary (Indicative)
| Component | Estimated Cost (USD) |
|---|---|
| Mining and Exploration | [$50,000] |
| Milling Plant Setup | [$523,950] |
| Infrastructure and Equipment [$250,00] Working Capital (6 months) | [$90,000] |
| Total Investment Required | [$913,950] |
Projected recovery rates: 70–90%, with gold output of 8g/t on vat leaching and 5g/t on ball mill +CIL combined based on ore grade tests. When leaching 20t / day, in 6 months the [Total = $5 867 680 (R101 804 248)]. The payback period is expected to be [12–18 months], depending on production levels and gold price fluctuations.
4. Why Partner with Us
- Legally compliant operation with all necessary mining licenses in process or approved.
- Strategic location near existing artisanal mining communities and road networks.
- Experienced management and technical team with local knowledge.
- Strong potential for scalability and sustainable returns.
5. Partnership Proposal
We propose two possible partnership models:
Option A: Joint Venture
- Investor provides full or partial project funding.
- Profit-sharing arrangement: Investor – 60%, Project Owner – 40%.
- Option to convert investment into equity after an agreed period.
Option B: Loan or Project Finance
- Investor provides capital as a recoverable loan.
- Repayment over 12–24 months from project revenues with agreed interest or royalty.
6. Project Advantages
* Legally registered claims and permits.
* Strategic location near active artisanal mining zones.
* Ready market for custom milling services.
* Experienced management and technical team.
* Sustainable and scalable operation with potential to expand plant capacity.
7. Conclusion
We invite you to consider this opportunity to invest or partner with us in establishing a profitable and sustainable gold mining and milling operation in Zimbabwe. We are open to discussions on joint venture terms or structured funding arrangements.
This project offers a low-risk, high-return investment opportunity in Zimbabwe’s robust gold sector, supported by strong local partnerships and compliance with government frameworks.
We welcome the opportunity to discuss this proposal further and to present detailed feasibility and geological data to support your due diligence process.
We look forward to your favorable consideration and the possibility of a meeting to discuss the details further.
Find an attachment for full information.
Customer Milling:
Customer milling is a risk free investment because artisan miners will be using their resources to extract gold ore that they bring to your milling center for processing leaving sands for you for free containing more than 70% gold that will be recovered through leaching tanks.
Another 30% is recovered through CIL (Cyanide In Leaching) from ball mills that can produce very fine powders, with particle sizes as small as 10 microns or even smaller.
Artisan miners recover 25% – 30% free gold because some of the gold will be in sand particles that are more than 20 microns and some gold is washed away by the pressure of water during processing.
2025-5-17 JXSC Quotation of 200TPD Rock Gold Gravity Separation & CIL Processing Plant – Prices
Gold Buying Prices At Zimbabwe Fidelity Per Gram / Ounce (31.1g) – 24 October 2025
HOW WE WILL BEAT OTHER COMPETITORS ON CUSTOM MILLING:
- Tipper Truck With Hydraulic Loader.
- Mini Front Endloader.
- Jaw Crusher.
- Front Endloader.
- Equipment & Machinery.
Read more detailed information below.
Machinery That Needs To Be Bought To Start The Custom Milling Project:
1. Round Mill (Chinese Machine) – For milling gold ore (stones), supplement of a stamp mill.
Advantages:
(a) It is affordable.
(b) It is faster than a stamp mill making it easy for customers not to wait for days milling.
(c) It is durable & easy to maintain.
(d) It attracts more customers because of its efficiency on milling.
2. Leaching Tanks (Bricks) & Carbon House – It`s for leaching sands that are milled by the round mill.
Advantages:
(a) It’s a gold recovery tank for sands. Customers only recover 25% – 30% of free gold & the rest goes with the sand particles and water pressure whereby you recover it by using chemicals in tanks to smelt the gold. (Profit of 70%) on recovery.
(b) The tanks are cheap to construct, 60t capacity costing USD480. Artisan miners pay USD40/day for leaching.
(c) Carbon house – It`s where you trap the gold in liquid form the tanks through carbons. It is cheap to construct costing USD1600 full set.
3. Jaw Crusher– It`s for crushing ore (stones) to small pieces to facilitate fitting in the round mill hence making the grinding process easy and faster.
Advantages:
(a) It makes milling easy & faster.
(b) It makes the roundmill last longer.
(c) It attracts more customers on the regard of facilitating crushing ore. Customers crush rocks using hammers so that ore fits in the roundmill.
4. Tipper Truck With Hydraulic Loader – It`s for loading ore & sands for customers to the plant for milling & leaching.
Advantages:
(a) Since it has a hydraulic loader, it facilitates loading and offloading for customers whereby the machine does everything for them hence attracting more customers.
5. Front Endloader X 2, Small & Big One – Small mini front end loader is for loading offloading ore into the bin to the jaw crusher and to the round mill. Big front end loader is to facilitate loading and offloading sands from the milling pit to the tanks.
Advantages:
(a) Small mini front endloader loads and offload ore to the bin for the customers facilitating work hence attracting more customers.
(b) Big front endloader facilitates loading and offloading sands from the pit to the tanks.
Ball Mill – It`s for grinding the sands from leaching tanks to smaller to very fine powder.
Advantages:
(a)It`s efficient and fine grinding, versatility in material handling, and suitability for both batch and continuous operations.
(b) Ball mills can produce very fine powders, with particle sizes as small as 10 microns or even smaller.
(c) They can achieve a narrow size distribution, meaning the particles are relatively uniform in size.
(d) The cost of installation and the grinding media (balls) is relatively low.
(e) They are efficient for large-scale production and can be used for continuous operation.
(f) They can handle a large amount of material in a single batch, making them suitable for high-volume production.
CIP / CIL (Cyanide In Leaching) Elusion Tanks – For processing grinded sands from the ball mill that are very fine powder.
Advantages:
(a) Elusion tanks are high efficiency in recovering valuable metals, wide applicability to different materials and flows.
(b) Cost-effectiness through optimized process and reduced consumption.
(c) They also enable automation, quick cycles, and energy efficiency.
(c) Elution tanks can achieve high recovery rates, even exceeding 95% with optimized parameters like temperature, pressure, and eluent concentration.
(d) Automation enhances process efficiency by optimizing parameters and reducing gold loss.
(e) Elution processes are adaptable to various adsorption materials (like activated carbon or resin) and process flows.
(f) They can be integrated with other gold ore beneficiation processes, like heap leaching, CIP, and CIL, catering to diverse mining needs.
Gold Elusion Boiler – Used to heat eluent solutions to desorb gold from activated carbon. These boilers are a key part of the gold extraction process, ensuring efficient and effective recovery.
Advantages:
(a) Elution Column: Holds the carbon loaded with gold.
(b) Elution Boiler: Heats the eluent (e.g., cyanide solution) to the required temperature (typically 110-140°C).
(c) Heat Exchangers: Preheat the eluent before it enters the boiler.
(d) Pumps: Circulate the eluent between the boiler and the elution column.
(e) Instrumentation: Monitors temperature, pressure, and flow rates.
Conclusion
Okay, perfect if you understand. It’s a good investment that is risk-free, trust me.
Check if artisan miners get the lowest ever, 0.5g/t on free gold. We recover about 2g/t on leaching sands.
Which is 2g x $124/g = $248 x 20t / day = $4960 (R85 056) / day x 182 days (6 months) Total is ($902 720) R15 662 192.
Look at that heap of vat leached sands that have been thrown away because they don’t have ball mill + CIL plant.
If we can collect that heap for free, which is approximately more than 1000 tonnes producing to the least of 2g/t x 1000t = 2000g(2kg) x $124/g = $248 000 (R4,302,800) for free in two weeks.
Sometimes, you recover more than 2g/t, and I have put it to the lowest. Can you imagine collecting those sands at 4 sites & how much you will make in the first two months.
Artisan miners produce & leach every day since mining is the only source of income. The figures support the estimation that it’s risk-free & the investor can recover injected capital in 8 months.
I haven’t mentioned the sands that you will acquire through clients that will hire your tanks for vat leaching & the sands that you will acquire through customer milling without being leached.
I haven’t mentioned that ore which is less than 1g/t, that the artisan miners throw away say it’s low grade for free gold recovery.
Gold Mining:
There is an opportunity of mining on two blocks that were done grassroots exploration of desk studies, area selection, land acquisition, regional studies (geology, survey, geo magnetic geophysics), preliminary community engagement. The survey was conducted tracing belts of adjacent mines that are currently doing very well producing high gold volumes.
Geology Of The Target Area, Surrounding High Potential Gold Mines Production Results & Geo Magnetic Results Of Dambridge Block 1 & 2 Claims Showing Areas Of High Concentration Of Gold:
GEO MAGNETIC SURVERY RESULTS:
Total Magnetic Field Map For Dambridge Block 2 (ATM NTOBE B)
The intense purple to red color shows the high-intensity value and the blue shows the lowest value.
The rectangle drawing on map shows the dimensions and position of the gold claim block.
Alphabet E represents position of the shaft, Dambridge block 2 has a shaft and belt at 28m, but has low gold values since depth is low. A geochemistry sampling of dumps was done.
The block is 10 Hectares in size, it can be extended.
[Find full geo magnetic survey report below]
Dambridge block 2 has a shaft and belt at 28m, but has low gold values since depth is low. A geochemistry sampling of dumps was done, [Sample Prep MT1] Fire assay with AA finish [Detection Limit 0.006 MT2], parts per million [ppm]. Results at 18m were 0.29. Another geochemistry sampling was done, Bottle Roll with AA Finish [Detection Limit 0.03 MTS], parts per million [ppm]. Results at 18m were 0.24. Find full reports below for (ATM NTOBE B) Dambrige Block 2 .
The other block geo magnetic survey report:
Total Magnetic Field Map For Dambridge Block 1 (ATM NTOBE D)
The intense purple to red color shows the high-intensity value and the blue shows the lowest value.
The rectangle drawing on map shows the dimensions and position of the gold claim block.
Alphabet D represents position of the shaft, it is just 8m deep. There is none geochemistry reports. Belt was not reached.
The block is 10 Hectares in size, it can be extended.
BENEFITS OF CUSTOM MILLING & MINING PROJECT:
(a) Custom Milling.
(b) CIP / CIL (Cyanide In Leaching) Elusion Tanks.
(c) Gold Elusion Boiler.
(d) Leaching Tanks.
(e) Tipper Truck With Loader.
(f) Gold Mining.
Read more information explained in detail below.
INTRODUCTION:
The survey site is located in Silobela district in the Midlands province. The district
itself is host to a number of gold mines like Maligreen Mine, Peace Mine, Turtle
Mine, Empress Mine and Leopard Mine now jointly know as Jena Mines. The area
is known to be the host of hundreds of artisan miners actively extracting gold in
the area. There is a lot of machinery and equipment that artisan miners do not have to facilitate mining and processing hence if you have the machines and equipment to provide for them, its a huge advantage to attract most of them to support your custom milling investment. An investor is needed to carry out professional advanced exploration and mining at two Dambridge blocks.
Excutive Summary:
Our Privacy Policy: All the information above is fair and lawful and for legitimate and necessary reasons, which include; to identify you; to comply with the legal requirements / terms & conditions; to understand your needs and to determine your eligibility.
Our Declaration: I hereby confirm the information contained herein, for the above JV / Funding facility and certify that all the information provided by me above and attached there to is correct and complete.
HISTORY:
- (ATM NTOBE D) Dambrige Block 1 & (ATM NTOBE B) Dambrige Block 2 were discovered in Oct 2016 at Dambridge area in Silobela, Midlands Province in Zimbabwe through desk studies, area selection, land acquisition and preliminary community engagement for gold mining. Block 1 & 2 are 2km apart, with different belts.
- Furthermore, regional studies (geology, survey, geo magnetic geophysics) were carried out on grassroots exploration of geo magnetic survey for gold in Nov 2016.
- After when the survey was conducted, there was community engagement and the Zibagwe Rural Council involvement for approval to setup a gold processing plant. In Dec 2016, a letter of approval was issued out by the Zibagwe Rural District Council and payment was done.
- The gold mine documents certificate of registration were issued out in Sep 2019 at the Ministry Of Mines in Gweru under the Mines & Minerals Act.
- Mining operations started in Sep 2020, by sinking standard shafts at block 1 & block 2.
- At block 2, the belt was reached at the depth of 16m. Geochemistry 3 samples were conducted at Antech Laboratories in Kwekwe on Oct 2020 for dumps & rock chips. View the geochemistry lab results above.
- A tunnel was open at 18m following the belt up to 28m and then funds ran out to continue.
- At block 1, the shaft is 9m, no belt found.
- All the belts were traced from adjacent mines that are currently producing high volumes of gold through the geo magnetic survey.
Zibagwe Rural District Council letter of approval to setup a gold processing plant
This letter was approved by the community, chief, area counselors and the zibagwe rural district council to setup a gold processing plant at Dambridge village, ward 25 in Silobela at (ATM NTOBE D) Dambrige Block 1 & (ATM NTOBE B) Dambrige Block 2.
The letter was written and signed by the provincial mining director of the ministry of mines and mining development – Midlands Province.
The mines and minerals act – Certificate of registration
This certificate of registration is attached with the licence for mining rights in Dambridge area, Silobela issued and signed by the provincial mining director – Midlands Province.
EXCECUTIVES:
Keith Thabani Mpofu (Director)
- Keith Thabani Mpofu is the core founder of (ATM NTOBE D) Dambrige Block 1 & (ATM NTOBE B) Dambrige Block 2.
- There is only one director in the company at the moment, hoping to get more directors, investors & share holders in the future.
- Keith Thabani Mpofu is the currently director of Platforms Links, an online advertising & ecommerce platform registed and operating in South Africa.
Leave a Reply